Get 6 Months Interest Free Financing With PayPal Pay Later.
Click Here To Learn More. 

1-2 Week Lead Time, Some Sizes In Stock
 
Description:
The Highcom SA3920 Soft Armor Panels are a NIJ 0101.06 Level IIIA Certified, ballistic armor solution.
At only 0.19" thin, and 0.86 (psf) this is our highest end, thinnest, lightest, best performing and most concealable level IIIA soft armor.

Engineered with a proprietary hybrid solution of unidirectional materials, the SA3920 utilizes DSM Dyneema® Polyethelene (UHMWPE) and Twaron® Aramid. 
This gives the SA3920 unmatched thickness, protection and weight savings. 

The Highcom SA3920 is NIJ 0101.06 Certified Level IIIA and is also also meets or exceeds additional DEA and FBI Special Threat Testing requirements. 
The SA3920 has been extensively tested to nearly two dozen additional threats beyond what the NIJ requires. 
The SA3920 is rated up to .44 Magnum as well as 5.7x28mm SS195/197 and US military standard fragmentation.
(Full threat chart at the bottom of the page and in product pictures).
The SA3100 is also rated for 9mm +P+, .45 ACP and .40 S&W contact shots (muzzle pressed against the vest) as per FBI special threat testing. 
Many soft armor solutions do not use the materials necessary to stop contact shots which is why FBI and DEA special threat testing is incredibly important for soft armor solutions.

These may be used standalone in a vest, or they can be used as ballistic IIIA plate backers to reduce blunt force trauma or complete non standalone ICW (In Conjunction With) armor plates.
Sometimes you don't need rifle protection or want lower profile and lighter side armor, these are a great option. 
You can get these in the standard 6x6 or 6x8 size and use them in hard armor side plate pouches, or you can get one of the longer sizes for use in soft armor side pockets.
 
About Highcom:
Highcom is one of the largest domestic manufacturers and one of only a handful of US armor companies who fully manufacture their plates in house and heat press their own backers. 
They are also one of the only companies with their own In House Ballistic Testing Laboratory (See Here), which allows them to perform ballistic tests on every single batch of armor before being shipped to end users. 
Highcom was established in 1997 and has been making armor for over 25 years, they were one of the first US manufacturers to sell ceramic level 4s to civilians.
Highcom currently has 17 hard and soft armor models active on the NIJ Certified Products List. 
Highcom is a lesser known company due to the fact they are primarily a government/ military supplier. 
 
Specs:
-Level IIIA Stand Alone
-NIJ 0101.06 Certified
-FBI & DEA Special Threat Compliant 
-Less than 1 pound per panel
-0.19" Thin
-Area Density: 0.86 psf
-Water Resistant Sealed Cover
-Made in the USA, 5 Year Warranty
 
Apex LIFETIME Replacement Guarantee:
Apex Armor Solutions stands behind the reliability and quality of the products we sell.
In the unfortunate event that you are shot while wearing products purchased from us, we will replace it at no cost anytime, as long as a police report is provided.
This includes all of our Body Armor, Plate Carriers, Pouches/ Accessories and Apparel.
We will also replace gear that is severely damaged during a natural disaster such as hurricane, tornado or flooding, as long as evidence is provided.